OrCam Learn Settings Menu Layout
-
Reading Rate Menu
- This is how fast your device reads text. You may choose reading rates from 1 to 10 (~between 100 - 300 words per minute).
-
Volume Menu
- You may set the volume level between 1 to 10, with 1 being the lowest setting and 10 being the highest setting.
- You may also set the volume outside of the audio settings menu at any time the device is awake yet not being used (not in Suspend mode) either using a vocal command or manually.
- To increase the volume:
- Double tap the trigger button and say after the long beep, “Volume up”.
- Press the plus (+) button.
- To decrease the volume:
- Double tap the trigger button and say after the long beep, “Volume down”.
- Press the minus (-) button.
- To increase the volume:
- You can also adjust the volume in the Controls section of the OrCan Learn app.
- OrCam Learn will announce when you reach the minimum and maximum volume level.
-
Reading Settings Menu
- Set Date Format
- You may change the date format between “month day year”, “day month year”, and “year month day”.
- Change Word Spacing
- You can increase or decrease the length of time OrCam Learn pauses between each word during reading without slowing the time it takes to read each word.
- You can change the word spacing to Default, Medium and Long
- Enable or Disable Reading Navigation
- Reading navigation allows you to skip forward, backward, or pause while reading.
- You may enable or disable the feature here.
- Reading navigation allows you to skip forward, backward, or pause while reading.
- Enable or Disable Beeping when paused during reading
- You may enable or disable beeping sounds when the device is paused during reading.
- Set Reading Navigation Pause Time
- Reading navigation pause time determines for how long the reading is paused before it is canceled. You may set the reading navigation pause time to between 30 seconds and 5 minutes.
- Set Date Format
-
Language Settings Menu
- System Language Menu
- This is the language in which the device talks to you when making any system announcements.
- Currently Orcam Learn is only available in English.
- Reading Language Menu
- This is the language in which the device reads text to you.
- Currently Orcam Learn is only available in English.
- System Language Menu
-
Country Settings Menu
- Device Country Menu
- You may set the country of the device here. Setting the country will change some parameters and settings of your device so it can function better within the chosen country.
- Note: Changing the country does not change settings such as reading and system languages, time or time zone.
- Device Country Menu
-
Connectivity Settings Menu
- Bluetooth Settings Menu
- Connect to a Bluetooth audio device
- Retrieve the name of the connected Bluetooth audio device
- Disconnect from the connected Bluetooth audio device
- Forget all Bluetooth audio devices
- Bluetooth Settings Menu
- WiFi Settings Menu
- Retrieve the name of the connected WiFi network
- Remove all WiFi networks
- Check status of the internet connectivity
-
General Settings Menu
- Voice Menu
- Change the voices of each language.
- Set Time
- The device will read the time and date. You will be able to change the timezone, year, month, day, hour, and/or minute of the time and date here.
- Set Automatic Suspend Time
- Automatic suspend time determines the time to wait in idle state before going to Suspend mode. You may set the time to between 2 minutes and 30 minutes.
- Feedback Sounds Menu
- Trigger Sound Menu
- The trigger sound is the sound made when you press the trigger button.
- You can enable or disable the trigger sound here.
- Enable or Disable Processing Sounds
- Processing sounds indicate the device is processing the captured images.
- You may enable or disable the feature here.
- Enable or Disable Announcements on Automatic Suspend and Resume
- These announcements indicate whether the device will announce “Suspended” and “Waking up” or make a double beep sound upon automatic suspension of the device and subsequently awakening the device.
- Enabling this feature means that OrCam Learn will announce “Suspended” and “Waking up” upon automatic suspension of the device and subsequently awakening the device.
- Disabling this feature means that OrCam Learn will make a double beep sound without announcing “Suspended” or “Waking up” upon automatic suspension of the device and subsequently awakening the device.
- You may enable or disable the feature here.
- Trigger Sound Menu
- Restore User Settings to Default
- You will be able to reset all of the user settings back to the default settings.
- Change Camera Light Compatibility
- Here you may change the Flicker Rate to either 50 or 60 Hz depending on your region. It is recommended to choose the setting based on your location.
- Enable or Disable Light Conditions Notification
- Light conditions notification will test if there isn't enough light for the device to work and tell you so.
- You may enable or disable the feature here.
- Enable or Disable the Laser
- You may enable or disable the laser here.
- Enable or Disable Automatic Flash
- Automatic flash will turn on the device lights in case you point or touch and there isn't enough light for the device to work.
- You may enable or disable the feature here.
- Configure Vocal Commands
- Vocal commands determine in which cases a vocal command can be used; either manually by double tapping, fully either by saying “hey orcam” or double tapping, or not at all.
- You may change the vocal commands settings here.
- OrCam Contact Information
- You can retrieve OrCam’s contact information here.
- Reset Installation Retries
- If you have failed to upgrade your device, this feature will allow you to reset your device in order to successfully upgrade without losing your learned data.
- Device Serial ID
- You can retrieve the device’s serial ID with this option.
- Version Information
- You will hear the full version information of the device by selecting this option, including all supported languages and features.
- Voice Menu
- Exit